A franchise name alone is not a reliable way to guess sleeve size, and Lorcana and KeyForge are two of the most commonly mis-sleeved games for exactly that reason.
Collectors searching for oversized or tarot-size sleeves often assume Lorcana's main deck, KeyForge's deck, or both need the bigger format, when in practice neither one does.
The real oversized and tarot-size sleeve market exists for a much narrower set of items than most shoppers expect, and mixing that up wastes money on sleeves that never fit snugly.
Here is an honest breakdown of what actually needs tarot-range protection, what doesn't, and the closest real EVORETRO options for the items that genuinely do.
Disney Lorcana's standard playing cards measure roughly 63 x 88mm, the same footprint used by Magic: The Gathering and Pokemon, so any standard-size sleeve fits a main deck without modification or special ordering.
KeyForge cards from Call of the Archons onward use that identical 63 x 88mm standard too, meaning a KeyForge deck sleeves exactly like any other mainstream TCG despite the game's reputation for breaking convention everywhere else.
Tarot-size cards run approximately 70 x 120mm, noticeably taller and wider than standard trading cards and much closer to the footprint of an actual tarot deck than anything found in a typical 60-card TCG build.
That size category mainly exists for literal tarot and oracle decks, a handful of older or specialty card games, and certain oversized promotional cards, not for any mainstream game's primary constructed deck.
Lorcana's real exception is its oversized promotional cards, full-art pieces handed out at events or bundled with select products, which measure close to 88 x 126mm, noticeably larger than even the standard tarot-size range above.
These promos are the actual reason oversized Lorcana sleeve searches exist in the first place, not the main deck, so a collector chasing one of these pulls genuinely needs different protection than the rest of their binder.
Jumbo Pokemon promo cards, certain oversized trading card game promos, jumbo sports card inserts, and board game decks from titles built around deliberately oversized cards all land in this bigger bracket for real.
Plenty of non-TCG items collectors store on the same shelf fall here too, like actual tarot and oracle decks, which means a multi-hobby collection often needs both standard and oversized supplies stocked side by side.
EVORETRO's current oversized lineup is built around jumbo toploader-and-sleeve combos rather than a raw tarot-dimension sleeve pack, and for most jumbo promos that combo format is actually the sturdier choice since the toploader adds rigidity a sleeve alone cannot.
The Jumbo Toploader & Sleeves Bundle and the larger XL Jumbo Toploader Sleeves Combo both fit the oversized jumbo card footprint, which lands close enough to the Lorcana oversized-promo and general tarot range to work as a genuine, in-stock option right now.
A dedicated tarot 70 x 120mm sleeve listing exists in EVORETRO's catalog, but as of this writing it is still a pre-launch listing without open inventory, so this guide cannot honestly point shoppers toward it as a current purchase.
Until that listing opens for real orders, the jumbo toploader combos above remain the closest in-stock match for anything landing in the tarot-size bracket, worth revisiting if a raw sleeve-only format ends up mattering more than a rigid combo.
The safest approach for a mixed Lorcana, KeyForge, and oversized-promo collection is to measure the actual card in hand rather than assume by game name, since one franchise can genuinely span two size categories at once.
Keeping standard sleeves, like EVORETRO Matte Card Sleeves, stocked alongside a jumbo combo covers both ends of a collection without constant reordering mistakes.
A cheap ruler marked in millimeters is all it takes to settle the question: lay the card flat and measure the long edge first, since that single number instantly separates a standard 88mm card from a tarot-range card running closer to 120mm.
Comparing an unfamiliar card directly against a known standard card, like a basic Pokemon or Magic common already in a binder, is an even faster gut check when a ruler isn't handy, since the size difference between standard and tarot-range cards is obvious once held side by side.
No, standard Lorcana cards use the same 63 x 88mm size as Magic and Pokemon.
No, KeyForge uses the same 63 x 88mm standard as most mainstream TCGs.
Roughly 70 x 120mm, noticeably larger than any standard TCG card.
Yes, it is currently the closest in-stock match for that oversized format.
Skip the guesswork on card dimensions and grab the Jumbo Toploader & Sleeves Bundle for anything landing in the oversized bracket, from jumbo promos to full-size tarot decks.
!
