75457 Executor Super Star Destroyer is officially the longest LEGO set ever made, and LEGO's own engineering team ran straight into that problem before any customer did.
Lead designer John Ho told Brick Fanatics and other fan media that the 136cm model was simply too big for the standard heat-test chamber LEGO normally uses to check how a set holds up over time.
Their fix was to send the Executor to the Billund swimming pool sauna instead, the same unconventional testing spot used for other oversized LEGO models like the Eiffel Tower and the Titanic.
If LEGO's own test facility couldn't accommodate this set without improvising, it's worth asking what that means for the shelf it eventually lands on in your home.
Large, flat LEGO models with heavy overhanging sections are prone to sagging under their own weight over time, a problem LEGO was already familiar with from 75367 Venator-Class Republic Attack Cruiser's engine sections.
The Executor's engines sit on an even longer, flatter structure than the Venator's, which is exactly why LEGO's design team flagged potential sagging as a real risk heading into this set's development.
LEGO's standard heat-test oven is sized for typical sets, not a 136cm-long model, so the design team had to borrow a testing method already used by the LEGO Icons team for its biggest builds.
According to Ho, the Billund swimming pool sauna is one of the few shared testing facilities in the building large enough to fit oversized models, and it's become a known, if unusual, go-to spot for exactly this kind of problem.
Heat isn't the only factor that causes sagging; simple time under gravity matters too, which is why another LEGO department is keeping a copy of the set in their basement specifically to track how it holds up.
Early results suggest the Executor's expected sagging should be less severe than the Venator's, according to Ho, though LEGO's own team won't have a complete answer until the model has been on a real shelf for months.
If LEGO's engineering team needed a swimming pool sauna to properly stress-test this model, a typical home shelf wasn't part of their testing environment either, and that's worth taking seriously before ordering.
136cm of finished model needs a shelf, stand, or cabinet rated for both that length and the weight of 6,130 pieces, not just enough open space to set it down.
We checked our own catalog specifically to see whether we could point you toward a shelf-support product built for a model this large, and the honest answer is that we don't carry one. A structural brace or support rated for a 136cm, multi-kilogram LEGO model isn't something in our current lineup, and recommending an unrelated product as a stand-in would be misleading.
What we can genuinely help with is the smaller, separate pieces this set is actually built around: the seven-minifigure bounty hunter diorama and the scale Star Destroyer side build, both of which detach from the main ship and have real display needs of their own. A LEGO minifigure display case fits that bounty hunter lineup specifically, separate from the main hull's shelf-support question.
Measure twice before this set ships: 136cm long, 50cm wide, and 20cm tall is a significant footprint that rules out most standard shelving without some rearranging.
Solid shelving rated for real weight, not just depth, matters more here than it would for a typical display set, given how much mass 6,130 pieces actually adds up to. The detached Star Destroyer side build is small enough to sit on an acrylic display riser next to the main hull without adding meaningfully to that weight concern.
It's also worth checking whether a shelf's bracket hardware, not just the shelf board itself, is rated for the added weight, since a board can hold the load while an undersized bracket behind it is actually the weak point.
At 136cm long, the model didn't fit the standard chamber size.
The Billund swimming pool sauna, also used for other oversized models like the Eiffel Tower.
No, we don't currently carry a structural brace rated for a 136cm LEGO model.
The seven-minifigure bounty hunter diorama and the scale Star Destroyer side build.
A record-breaking set deserves planning that starts before delivery day, not after. Start with a LEGO minifigure display case for the bounty hunter diorama while you sort out shelving for the hull itself.
!
