Not every display case is built for the same kind of collectible, and depth is the dimension collectors underestimate most. A case sized for flat cards or sealed packs can leave a boxed figure or a stack of sealed product with nowhere to actually sit inside.
The EVORETRO Lockable Aluminum Display Case measures 36 x 24 x 4 inches, giving it real interior room compared to EVORETRO's thinner showcase case. That extra depth changes what the case is actually good for, and it is worth understanding before choosing between the two.
This guide covers what the 4 inch depth is useful for, how to choose between vertical and horizontal orientation, and who this case is actually built for.
EVORETRO also sells a slimmer lockable showcase case at 36 x 24 x 1.65 inches, and the two are easy to confuse at a glance since both share the aluminum frame and locking front panel. But 1.65 inches of depth is built for flat items like graded slabs, raw cards, and sealed packs laid out in a row.
The 4 inch case is a different tool for a different job. That extra 2.35 inches of depth is the difference between a case that can only hold flat items and one that can actually hold something with real volume standing or lying inside it.
Four inches of interior depth is enough room for boxed figures, sealed retail boxes, smaller collectible statues, and other three-dimensional pieces that a thin case simply cannot accommodate. Anything with meaningful height or thickness needs a case built around that reality, not squeezed into one that was not.
This depth also gives sealed product some breathing room rather than pressing directly against the glass, which matters for anything with printed packaging that collectors want to keep looking clean over time.
The case is available in both vertical and horizontal orientations, and the right choice depends entirely on what is going inside. Vertical orientation suits taller items like boxed figures or standing statues, keeping the display's footprint narrow on a shelf or counter.
Horizontal orientation suits wider layouts, such as several sealed boxes lined up side by side or a spread of items meant to be viewed across rather than up and down. Vendors setting up a trade show table often lean horizontal for exactly this reason.
Collectors and vendors dealing with anything bulkier than flat cards or packs should start with the EVORETRO Lockable Aluminum Display Case (36 x 24 x 4 Inch). Its combination of real depth and a locking front panel makes it a practical option for both home display and vendor trade show setups.
Anyone whose collection is mostly flat slabs and sealed packs should instead look at EVORETRO's thinner 1.65 inch showcase case, which is built and priced around that flatter use case.
The locking front panel is not just a display feature, it is a security feature, and that combination matters most at a trade show table where product needs to be visible but not touchable without permission. The aluminum frame also holds up better to repeated setup and teardown than lighter display options.
At $299.95, this case is a bigger investment than a basic display stand, but it is priced for collectors and vendors who need a display solution that travels and locks, not just one that looks good sitting still at home.
A locking case is only as secure as where it sits, so plan placement on a stable surface or table before locking valuable product inside. Vendors moving the case between shows should also confirm the orientation choice before the event, since switching a full case around on-site is far less convenient than deciding ahead of time.
Cleaning the aluminum frame and glass panel periodically keeps the display looking professional, which matters more for a vendor case seen by dozens of potential buyers than for one sitting quietly in a collector's home.
It measures 36 x 24 x 4 inches.
The other case is 1.65 inches deep and built for flat items, while this one is 4 inches deep for bulkier, three-dimensional pieces.
Yes, it is available in both vertical and horizontal orientation.
Yes, its locking front panel and aluminum frame are built for repeated vendor setup and teardown.
Boxed figures, sealed retail boxes, and other three-dimensional collectibles fit best given the extra depth.
Boxed figures and sealed product deserve a case built for their actual size, and the EVORETRO Lockable Aluminum Display Case (36 x 24 x 4 Inch) gives them that room while keeping everything locked and visible.
!
