Display CasesFigure ProtectionZenless Zone Zero

Protecting Your Zenless Zone Zero Figures: A Display and Storage Guide

Zenless Zone Zero finally has two scale figures worth protecting properly: APEX's Jane Doe and Myethos's Hoshimi Miyabi Sparkling Wonderland Ver.

Both arrive as painted PVC and ABS pieces in window boxes, which means the same two protection questions every scale-figure collector eventually asks: how do I keep the box safe while it sits sealed, and how do I display the figure once it's out?

Because ZZZ is a new figure category, no manufacturer currently sells a box protector sized specifically for either release.

That is a real gap worth being upfront about, so here is the honest version of how to protect these figures rather than a forced recommendation that does not actually fit.

Why There Is No Exact-Fit Box Protector Yet

Dedicated box protectors exist for high-volume lines like Funko Pop and Nendoroid because manufacturers produce thousands of units in a handful of standardized box sizes.

Jane Doe and Miyabi are newer, lower-volume releases in non-standard window boxes, so no supplier has tooled a protector to their exact dimensions yet, and that may not change until ZZZ figures ship in higher volume.

Protecting the Sealed Box Before You Open It

Until a dedicated protector exists, the safest move for a sealed box is simple: keep it in its original shipping sleeve, out of direct sunlight, and away from stacked boxes that can crush thin window panels.

A dry, temperature-stable closet shelf does more real protection work for an irregularly-sized box than any generic sleeve that does not actually fit snugly.

Displaying the Figure Once It Is Out of the Box

Once unboxed, the bigger risk shifts from box damage to dust, fingerprints, and UV fading on painted PVC, especially on Miyabi's metallic-painted stage accessories.

An enclosed case solves all three at once, which is why a sealed display case is the better long-term home for an out-of-box figure than an open shelf.

Why an Enclosed Acrylic Case Is the Honest Recommendation Here

The EVORETRO 5-Tier Acrylic Display Case is not a Zenless Zone Zero-specific product, and it will not accept a still-sealed, boxed figure.

What it does well is give an unboxed figure a dust-free, closed-front home with real shelving, which is the actual protection problem most collectors are solving once the figure is out of its packaging.

Tiered Risers for a Growing ZZZ or Mixed HoYoverse Shelf

If you are not ready to commit to a fully enclosed case yet, an EVORETRO 4-Step Acrylic Display Stand at least keeps figures elevated, separated, and easier to dust without touching the paint directly.

This works especially well if you are already running Genshin Impact figures on the same shelf, since it lets a mixed HoYoverse lineup share one tiered setup instead of fighting for flat shelf space.

Cleaning and Maintaining Painted PVC Safely

Dust a finished figure with a soft, dry brush rather than a cloth, since a cloth can catch on fine details like hair strands or weapon tips and snap them off.

Avoid household glass cleaners or alcohol-based wipes on painted PVC, since both can dull or strip paint that was never meant to handle solvents.

Should You Keep the Original Box After Unboxing?

Many collectors keep the original window box even after displaying the figure, since an intact box meaningfully protects resale value if you ever decide to sell.

If shelf space is tight, a flattened box stored flat in a closet still preserves most of that value without taking up display-adjacent space.

Handling the Figure Safely When Dusting or Moving It

Always lift a scale figure from its base rather than grabbing a limb or weapon, since thin PVC accessories like daggers are the most common breakage point during routine dusting.

If a figure includes a removable accessory, consider storing that piece separately in a small padded box when not displayed, reducing the chance of it snapping off during a move or shelf reorganization.

What to Measure Before You Buy Anything

Jane Doe stands roughly 29.8cm tall including her base, and Miyabi's Sparkling Wonderland figure is around 22.6cm, so measure your actual shelf clearance before assuming either case or stand option fits both comfortably.

A little measuring now avoids returning a product that looked right in a photo but is a centimeter too short in person.

Common Mistakes

  • Assuming a Funko or Nendoroid protector will fit a ZZZ figure's window box.
  • Leaving a finished figure on an open shelf in direct window light for months.
  • Stacking sealed boxes on top of each other, which can crush thin window panels.
  • Skipping measurements and buying a display case too short for a 1/7 scale figure.

Frequently Asked Questions

Is there a box protector made specifically for Zenless Zone Zero figures?

Not yet, since no manufacturer has tooled one for these box sizes.

What is the biggest risk to an out-of-box figure?

Dust and UV fading on the painted PVC, especially metallic paint details.

Can I use the same display case for Genshin Impact and ZZZ figures?

Yes, a multi-tier acrylic case works across HoYoverse franchises as long as the figures fit the shelf height.

Should I keep a sealed box in its shipping packaging?

Yes, until a dedicated protector exists, the original packaging is the safest option for a sealed box.

Building a Shelf That Actually Protects These Figures

A new figure category deserves an honest protection plan, not a forced recommendation. Start with an enclosed acrylic display case for any figure you plan to keep out of the box long-term.

Related Guides

Recommended Products