Ultra Pro's sleeve catalog is big enough that the names alone cause confusion: Eclipse, Pro-Matte, Pro-Fit, and plain Deck Protectors all sound similar but do different jobs.
If you have ever stood in front of a sleeve wall trying to figure out which line actually matches your deck, you are not alone.
This guide breaks down what each Ultra Pro line is actually built for, then covers where an EVORETRO sleeve setup lines up with the same role.
EVORETRO does not sell Ultra Pro-branded sleeves, so treat this as an honest comparison rather than a pitch for Ultra Pro stock we do not carry.
Eclipse sleeves use an added opaque black layer on the card back, which fully hides the card face from behind and cuts down on glare under bright lighting.
The current generation uses a 135-micron opaque back paired with a 90-micron clear front, available in both matte and glossy finishes across standard and small sizes.
Pro-Matte is Ultra Pro's baseline matte sleeve line without the opaque backing, giving a smoother, lower-glare shuffle feel than a glossy sleeve without the thicker Eclipse construction.
It is the line most players reach for on a budget constructed deck where glare reduction matters more than fully hiding the card back.
Pro-Fit sleeves are a tighter, thinner inner layer meant to sit directly against the card before it goes inside an outer sleeve, not a standalone play sleeve on their own.
They matter most in a double-sleeve setup, where the inner layer adds protection without adding much bulk to the final stack.
Standard size across Ultra Pro's sleeve catalog runs 66mm by 91mm, fitting Magic, Pokemon, and Lorcana cards, while small size runs 62mm by 89mm for Yu-Gi-Oh and other Japanese-format cards.
Pack counts vary by line, with newer Eclipse runs shipping 105 to a pack rather than the older 100-count standard.
The real decision is not which brand name sounds most premium, it is which role you are actually sleeving for: a main outer play sleeve, an opaque anti-glare upgrade, or a tight inner layer under a second sleeve.
Picking a sleeve based on role first avoids the common trap of buying three different lines you do not actually need for one deck.
Price-per-sleeve also shifts noticeably across roles, since an opaque Eclipse-style sleeve typically costs more per unit than a basic Pro-Fit-style inner layer, so matching role to budget is worth doing before comparing brands at all.
For the Pro-Matte role, the EVORETRO Matte Card Sleeves Standard Size covers the same low-glare outer sleeve job at standard sizing without needing Ultra Pro stock specifically.
For the Pro-Fit inner-layer role, the EVORETRO Perfect Fit Sleeves is built for the exact same tight, under-sleeve job in a double-sleeve setup.
Neither EVORETRO option claims to replicate Eclipse's fully opaque backing specifically, so if that one feature is the deciding factor for you, it is worth knowing upfront rather than assuming every matte sleeve hides the card back equally well.
Ultra Pro's lines ship in a wide range of colors across both Eclipse and Pro-Matte, which matters if you are color-coding multiple decks for quick identification at a table.
Pack counts have also shifted over time, with some newer Eclipse runs moving to 105-count packs instead of the older 100-count standard, so a direct price-per-sleeve comparison is worth doing rather than assuming pack size is fixed across every release.
Double-sleeving adds real thickness to a deck, and that thickness compounds fast in a 100-card Commander deck compared to a 60-card constructed deck.
If a deck already feels bulky with a single outer sleeve, adding a Pro-Fit-style inner layer is worth testing in a small batch before committing to resleeving the entire deck twice over.
No, EVORETRO does not carry Ultra Pro-branded sleeves; this is an honest comparison against EVORETRO's own sleeve lineup.
Eclipse adds an opaque black backing that fully hides the card face from behind, while Pro-Matte is a standard matte finish without that opaque layer.
No, Pro-Fit and similar inner-layer sleeves are designed to sit under an outer play sleeve, not as standalone protection.
Standard size, roughly 66mm by 91mm, fits Magic, Pokemon, and Lorcana cards.
Once you know whether you need an outer play sleeve, an anti-glare upgrade, or a tight inner layer, the brand name matters far less than matching the actual job.
The EVORETRO Matte Card Sleeves Standard Size covers the outer-sleeve role most decks actually need first.
!
